| |
|
 |
>
Home
> Decorative
World > Paint
Effects > Masked
Wall
|
Scaffolding
was the inspiration for this paint effect. This look
creates the illusion of perspective and a sense of
depth on a two dimensional surface.
It works best in more modern properties because it
looks very architectural and thereby creates the impact
of structure with paint. The effect is best achieved
using off white base colour and a grey topcoat.
This look, although unusual, can be effective either
on a whole wall, or just part of it.
|
 |
 |
RECIPE: refer to how to mix classic
colour glaze |
 |
INGREDIENTS: Classic colour glaze – light grey acrylic emulsion paint for the base coat– pot to mix glaze – 1 litre of dark grey acrylic emulsion for the top colour – a soft roller and tray – decorator tape – soft paint brush |
 |
LEVEL OF EXPERTISE: 1 star
1 star = extremely simple, 5 stars = not so straightforward |
 |
TIME REQUIRED: For a 2.5 x 3m wall, approximately 4 hours. |
 |
SUITABLE AREAS: This dominant feature should be painted on one wall only. It can be very effective if painted in a masked area within the wall, making it look like a piece of art. |
TECHNIQUE
Step 1: Paint the basecoat using light grey acrylic emulsion and leave it to dry thoroughly overnight.
Step 2: Using low tack decorator’s tape, decide whether you want to mask off a rectangle or an entire wall.
Step 3: Using two widths of tape (1cm and 2cm wide approx.), put strips onto the wall making sure the tape makes contact with the wall to stop paint seeping underneath.
Step 4: Mix the dark grey acrylic emulsion with classic colour glaze; two parts glaze one part emulsion.
Step 5: Paint with a brush to cut in around the edges of the wall, then use a roller to give the area one even coat of the glaze mix. Once finished, remove the tape immediately. Leave to dry overnight before replacing furniture.
TIP: This idea works well on a wall that needs touching up or repainting.
|
|
|
< Back
|
|
